HAPPY HALLOWEEN!! As you read in my very long post yesterday, I spent $114 Saturday. October is my most expensive month. Therefore, I always try to spend as little as possible on my costume. I already told you last week, I am always trying to re-purpose the costumes I already have, since I have an entire box of them. Also, I have many crafting tools at my disposal since I have been doing this for years. My emoji-boyfriend is not so into the costuming like me, but if I completely take care of the cost and the labor of making it, he will relent and wear what I make him. Therefore, I try and make his costume low-cost as well. Overall, I spent $41.25 for both of our costumes. Not too bad. It may cost a bit more if you need to buy a glue gun, but they are generally less than $10.

We got a LOT of compliments, so I figured I could tell you how to do it.

Supplies for the Tutu:

• Red Tulle
• Scissors
• Elastic or Ribbon that fits around your waist

Honestly, I don’t need to explain this whole process because I learned it, like many other things, from YouTube. Here’s a link to a great tutorial. You can decide either to use elastic as a waistband, or to use ribbon if you prefer to make a big bow on the back. If you use elastic, you’ll need a few stitches or a glue gun to connect the two ends.

I’ve done it both ways but I find elastic easier for bathroom purposes. Just cut the tulle to the width you prefer and cut it to twice the length you want, so you can double it over. I ordered it in 6-inch width from Amazon this year for ease, and because I didn’t have much time to cut the strips, but it was a bit more expensive. I linked it above, they have a lot of color options.

If you buy tulle from a fabric store, you’ll probably need 4-5 yards from a bolt (about $3/yard), but if you buy it like above from Amazon, you will probably need 4, 25-yard spools because they are only 6 inches in width. It also will depend on how long and fluffy you want your tutu. I needed to cover my silver-unitard-ed bum, so I wanted mine extra long.

Supplies for the coin slot:

• Piece of cardboard (cut out of any box)
• Duct Tape
• Sharpie

This was incredibly easy. I just took a piece of cardboard from a box and I covered it in duct tape. Then I drew on the coin slot. The tricky part is I made a little loop on the back from doubled-over duct tape, so I could tie some extra tulle to it, and connect it to the waistband of the tutu.

Supplies for the Quarter:

• One bowl for tracing
• One piece of silver poster board
• Scissors
• Sharpie
• Twine/string (stolen from the office)
• A friend with amazing freehand drawing skills

Not much to say about this: trace a bowl for a perfect circle, have an amazing friend copy a photo of a quarter from the internet. Trace the pencil outline with a Sharpie. Or just freehand it with a Sharpie. I was ready to just write “25¢” on a silver circle, but my friend made a real piece of art. Then I punctured the front and back of the quarter with a letter opener, and threaded the string through. If you have money to burn, it may be a good idea to laminate the pieces so they don’t get soggy from beer, but I was short on time and money, and my emoji-bf is clearly better at not spilling than me. It lasted all day!

Supplies for Gumball Belly:

• Same bowl for tracing
• 2 pieces of white felt
• Scissors
• Lots of pom poms
• Glue gun
• More sticks of glue for the glue gun than you’d think (I used 10)
• 4 safety pins

This was much easier than I anticipated. I spent a lot of time on the internet trying to decide how large the pom poms should be. Most people said 1 inch, so I bought the cheapest pack of them from Amazon (link above). They were definitely smaller than an inch, but it still worked out well and there was a great mix of colors. I traced the same bowl I used for the quarter on two pieces of felt, then hot glued them together. Then I started at the bottom of the circle, and tried to randomly place the colors, with some attention to keeping a variation of colors, but also not caring too much because real gumballs have the same color next to each other sometimes! It did take more glue than I thought it would, but ultimately only took about 10 minutes to complete while binge-watching Will and Grace. I opted not to use the white, brown and black pom poms, but that is up to your own artistic license. I also decided not to fill the circle up completely, to make it more realistic.

Safety-pin that baby onto your uni! (or tank top). I realized that I preferred it to be a bit underneath the tutu, making it more of a 3/4-moon shape, again to make the circle look a little more realistic like a gumball machine. Personal preference.

Supplies for headwear:

• Headband you’re willing to part with
• 10 pom poms (I had plenty left over from the belly)
• Glue Gun
• 2 sticks of glue

As I trolled google for gumball costumes, I saw a lot of people wear red beanies for the tops of the gum ball machine. That is a cute idea, but I have a really weird-shaped head. Every beanie I wear just makes me look bald. I settled on my old faithful hair accessories: headbands and bows! I glued 10 different-colored pom poms on a throw-away headband from CVS, and tied a red ribbon that I already owned in my hair.

I already owned a silver unitard from my previous jaunts as the Tin Man and a Hershey’s Kiss (see below), but for those of you who do not have one, you can always safety pin the gum ball felt belly on a white tank top and wear red shorts or a red skirt under your tutu. Highly recommend this costume, with or without the emoji-bf! You can be the quarter, too! The more accessories, the better. I plan on repeating the costume tonight to hand out candy to trick-or-treaters. Hopefully no one thinks I’m a clown and gets scared again! I think I already know what I want to be for next year, but if you have any great ideas, comment below! Have a boooo-riffic day!